Jackson Engineering
Tel. 01522 811354
Fax. 01522 811958
Email sales@jeukparts.co.uk
   

Willibald Parts

This page is relevant to the following models:

Willibald Shark MZA2500, MZA3500, MZA4800

Mill Strip for Wallibald JEUK42

 

Willibald Side Cutter

Willibald Side Cutter.

These side cutters/strips are situated at the end of the rotor. There is one at each side i.e. a left hand and a right hand side cutter. Like the JEUK42, their job is to protect the rotor from wear. There are two examples shown; one with extra carbide grit protection and the single one plain.

Willibald Hammer Willibald Hammer
Hammer